STEP-BY-STEP GUIDE - MASTERING YOUR NEW SHOWER UNIT INSTALLATION

Step-By-Step Guide - Mastering Your New Shower Unit Installation

Step-By-Step Guide - Mastering Your New Shower Unit Installation

Blog Article

Request Estimate



In this article down the page you will find more helpful material around How to Install a Shower Enclosure .


How to Install a Direct-to-Stud Shower Enclosure
A successful shower setup calls for careful planning and also a great deal of job. In most cases, you will need to do three types of tasks: mounting wall surfaces, mounting the plumbing, and completing wall surfaces.

Prep work


To start with, you must choose the kind of shower that you desire to install. It is important to ascertain whether the chosen shower is capable of dealing with specific systems as well as can regulate a risk-free level of water with the central heating boiler. Many shower systems nowadays are created to be versatile to various water stress (such as saved warm water and also cool keys).
It is also important to consider the water pressure and the planning of the piping and drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The pipe and also spray parts of the push-on mixer shower device can be attached to the bathroom faucet as per your demand, and also the water temperature level can be adjusted via the faucets. Push-on mixers are cheap and also exceptionally simple to install. However, although the hose connection is easy, it is quickly removed. Furthermore, it is troublesome to adjust the temperature.

  • Bath/Shower Mixer: The hose pipe and spray of this type of shower are combined with a bath mixer tap, as well as the temperature can be changed with the bath taps. It is a very low-cost choice as well as no extra plumbing is involved. However, the bath/shower mixers also suffer from bothersome temperature level control alternatives.

  • Guidebook Mixer: The hose and spray of a manual mixer shower device belong of the wall surface system as well as the cold and hot water products are linked to a solitary valve The temperature and stress of the water are regulated with either one or a range of knobs (in more pricey showers). Although temperature level control is much easier in manual mixer kinds, they are extra expensive than the formerly stated mixers. They likewise need additional plumbing of cold and hot water system pipes.

  • Thermostatic Mixer: The pipe as well as spray of this shower type belong of the wall surface system and the cold and hot water materials are connected to a solitary shutoff right here too. It is full with a built-in stabiliser to self-adjust the water temperature and also to avoid it from coming to be as well hot. Among the greatest advantages of a thermostatic mixer shower kind includes practical temperature level control. Nevertheless, it is one of the most costly of the various mixer choices.

  • Power Shower: A power shower is a solitary unit having a powerful electrical pump that is capable of changing both the water pressure as well as temperature level. This kind of shower can be fitted if there is water from a cold water tank and a warm water cylinder. A power shower makes the modification of both stress and temperature level easy. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is necessary to note that for this shower kind to be installed, the keys pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system permits the temperature and also pressure to be readjusted by means of a knob. Designs with temperature level stabilisers are better as they continue to be unaffected by various other faucets somewhere else in operation within the household. A significant downside of electric showers is that the control handle only enables the alternative of heats at less pressure, or reduced temperatures at a better pressure. This is troublesome in the winter when the spray is frequently weak and also the keys water is colder. Nevertheless, this trouble is tackled in some designs which are readily available with a winter/summer setting.


  • Technique


    Relying on the sort of shower you wish to set up, the shower head have to either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it needs to have a check shutoff.
    Prior to starting, it is recommended to mark the positions of the shower head as well as control, and also to plan the pipe-work involved. Furthermore, the water drainage system to get rid of the waste water will need to be prepared. Both placements of the wire route and the shower switch will certainly likewise require to be taken into consideration if a rapid or electrical shower system is being mounted.
    Make use of the guideline guide provided with the shower unit to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is necessary to remove the water supply. In order to protect the pipes, they ought to be given a water resistant covering and likewise fitted with isolating valves. The pipelines can after that be hidden right into the wall surface as well as plastered over to neaten the general look.
    Fit the base tray, shower head, and fittings.
    Connect the main shower control to the pipes that will be supplying the water (This may require a women screw string adapter).
    Reconnect the water and also examination the pipelines for any type of leakages, as some may need tightening up.
    If you are installing an electrical shower, remember to switch off the electrical energy supply before making any type of electric connections. Once these connections have actually been made (there need to be advice within the user's manual), the power supply can be switched over back on.

    Changing Water Pressure to Suit Your Shower


    The cold water reservoir can be raised to a better elevation (in some cases as little as 150mm (6inches)) by fitting a solid wood support below it - possibly composed of struts and blockboards. If you select this choice, the main and also circulation pipes will additionally need to be increased to meet the brand-new elevation of the tank.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be linked into the power supply in order to operate.

    Piping and also Water drainage


    It is best to make use of 15mm diameter supply pipes, and also make the runs to the shower as brief and straight as feasible so regarding maintain optimal pressure and reduce warm loss. Additionally, by reducing using elbows for pipe corners, you can lower the resistance in the flow of the water. You can accomplish this by bending the pipelines instead.

    A Lot Of Common Blunders


  • Breaking or overlooking local code limitations.

  • Using pipelines that are too tiny.

  • Attaching copper to galvanized without making use of a brass or dielectric fitting in between the two.

  • Not making use of tape or pipe substance at threaded joints.

  • Not leveling your components when installing them.

  • Not mounting an air gap loading for fixtures.

  • Reducing supply stub outs too brief to set up the shutoff valves onto after the finished wall surface remains in location.

  • Not effectively straightening tubing right into fittings or quit valves. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leak.).

  • When transforming the water back on in your home, constantly run the outside hose pipe shutoff or flush your toilets to bleed dust and air from the lines. This particles can create problems in your sink taps and also other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a Freestanding Shower Unit

    Do you appreciate more info about How to Install a Freestand? Try leaving a remark directly below. We will be pleased to listen to your suggestions about this piece. We are looking forward that you come back again before long. If you appreciated our blog post please be sure to share it. Kudos for your time. Come back soon.




    Schedule Appointment Now


    Report this page